1. Scope

1.1 This practice describes methods for measuring the sheet electrical resistance of sputtered thin conductive films deposited on large insulating substrates (glass or plastic), used in making flat panel information displays.

1.2 This practice is intended to be used with Test Methods F 673. This practice pertains to a 'manual' measurement procedure in which an operator positions the measuring head on the test specimen and then personally activates the test apparatus. The resulting test data may be tabulated by the operator, or, alternatively, sent to a computer-based data logging system. Both Methods I and II of Test Methods F 673 (paragraphs 3.1 through 3.3.3 of Test Methods F 673) are applicable to this practice.

1.3 Sheet resistivity in the range 0.020 to 3000 per square (sheet conductance in the range 3 by 10 ^-4 to 50 mhos per square) may be measured by this practice. The sheet resistance is assumed to be uniform in the area being probed.

Note 1Typical manual test units, as described in this practice, measure and report in the units 'mhos per square'; this is the inverse of 'ohms per square.'

1.4 This practice is applicable to flat surfaces only.

1.5 This practice is non-destructive. It may be used on production panels to help assure production uniformity.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

F673 Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage

Keywords

conductance; electrical conductance; electrical resistance; electrical sheet conductance; electrical sheet resistance; flat panel displays; noncontact eddy current; resistance; sputtered thin films; thin conductive films on glass; thin film; Electrical conductivity; Electrical resistance/resistivity; Electrical sheet resistance; Electronic thin-film applications; Noncontact technique; Sheet resistance; Sputtered thin films; Thin film applications;

ICS Code

ICS Number Code 31.120 (Electronic display devices)

DOI: 10.1520/F1844-97R02

ASTM International is a member of CrossRef.