ASTM D5854-96(2000)
Historical Standard: ASTM D5854-96(2000) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
SUPERSEDED (see Active link, below)
ASTM D5854
1. Scope
1.1 This practice covers the handling, mixing, and conditioning procedures that are required to ensure that a representative sample of the liquid petroleum or petroleum product is delivered from the primary sample container/ receiver into the analytical test apparatus or into intermediate containers.
1.2 Annex A2 covers acceptance test criteria for power mixer and sample container combinations, while Annexes A3 and A4 detail acceptance tests for mixing systems. Appendix X1 is a guide for selecting sample containers.
1.3 For sampling procedures, refer to Practices D4057 and D4177. Practice D5842 covers sampling and handling of light fuels for volatility measurement.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products
D4306 Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
D4928 Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
D5842 Practice for Sampling and Handling of Fuels for Volatility Measurement
Keywords
crude petroleum sampling; liquid petroleum sampling; sample containers; sample handling; sample mixing; sample preparation; sampling validation; Sample preparation--petroleum products; Sampling containers; Sampling petroleum products; Sampling validation;
ICS Code
ICS Number Code 19.020 (Test conditions and procedures in general); 75.080 (Petroleum products in general)
DOI: 10.1520/D5854-96R00
ASTM International is a member of CrossRef.
