Content Description

• /
• A6/A6M-24b: A6/A6M-24b Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling / 2024
• A36/A36M-19: A36/A36M-19 Standard Specification for Carbon Structural Steel / 2019
• A53/A53M-24: A53/A53M-24 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless / 2024
• A74-21: A74-21 Standard Specification for Cast Iron Soil Pipe and Fittings / 2021
• A105/A105M-24: A105/A105M-24 Standard Specification for Carbon Steel Forgings for Piping Applications / 2024
• A106/A106M-19a: A106/A106M-19a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service / 2019
• A123/A123M-24: A123/A123M-24 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products / 2024
• A126-04-Reapproved2023: A126-04(2023) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings / 2023
• A153/A153M-23: A153/A153M-23 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware / 2023
• A167-99(2009): A167-99(2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip / 2009
• A182/A182M-24b: A182/A182M-24b Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service / 2024
• A193/A193M-24: A193/A193M-24 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications / 2024
• A234/A234M-24: A234/A234M-24 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service / 2024
• A240/A240M-24: A240/A240M-24 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications / 2024
• A252/A252M-19: A252/A252M-19 Standard Specification for Welded and Seamless Steel Pipe Piles / 2019
• A254/A254M-12(2019): A254/A254M-12(2019) Standard Specification for Copper-Brazed Steel Tubing / 2019
• A268/A268M-24: A268/A268M-24 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service / 2024
• A269/A269M-24: A269/A269M-24 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service / 2024
• A283/A283M-24: A283/A283M-24 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates / 2024
• A307-21: A307-21 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength / 2021
• A312/A312M-24a: A312/A312M-24a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes / 2024
• A333/A333M-24: A333/A333M-24 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness / 2024
• A334/A334M-04a-Reapproved2021: A334/A334M-04a(2021) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service / 2021
• A395/A395M-99-Reapproved2022: A395/A395M-99(2022) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures / 2022
• A403/A403M-22b: A403/A403M-22b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings / 2022
• A416/A416M-24: A416/A416M-24 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete / 2024
• A420/A420M-24: A420/A420M-24 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service / 2024
• A463/A463M-22: A463/A463M-22 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process / 2022
• A518/A518M-99-Reapproved2022: A518/A518M-99(2022) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings / 2022
• A536-24: A536-24 Standard Specification for Ductile Iron Castings / 2024
• A539-99: A539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004) / 1999
• A563/A563M-24: A563/A563M-24 Standard Specification for Carbon and Alloy Steel Nuts (Inch and Metric) / 2024
• A572/A572M-21e1: A572/A572M-21e1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel / 2021
• A615/A615M-24: A615/A615M-24 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement / 2024
• A641/A641M-19: A641/A641M-19 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire / 2019
• A653/A653M-23: A653/A653M-23 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process / 2023
• A690/A690M-24: A690/A690M-24 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments / 2024
• A706/A706M-24: A706/A706M-24 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement / 2024
• A707/A707M-19: A707/A707M-19 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service / 2019
• A722/A722M-18: A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete / 2018
• A733-16-Reapproved2022: A733-16(2022) Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples / 2022
• A755/A755M-18-Reapproved2024: A755/A755M-18(2024) Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products / 2024
• A778/A778M-24a: A778/A778M-24a Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products / 2024
• A792/A792M-23: A792/A792M-23 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process / 2023
• A875/A875M-23: A875/A875M-23 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process / 2023
• A888-24: A888-24 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications / 2024
• A924/A924M-22a: A924/A924M-22a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process / 2022
• B32-20: B32-20 Standard Specification for Solder Metal / 2020
• B42-20: B42-20 Standard Specification for Seamless Copper Pipe, Standard Sizes / 2020
• B43-20: B43-20 Standard Specification for Seamless Red Brass Pipe, Standard Sizes / 2020
• B68/B68M-19: B68/B68M-19 Standard Specification for Seamless Copper Tube, Bright Annealed / 2019
• B75/B75M-20: B75/B75M-20 Standard Specification for Seamless Copper Tube / 2020
• B88-22: B88-22 Standard Specification for Seamless Copper Water Tube / 2022
• B101-22: B101-22 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction / 2022
• B135/B135M-17: B135/B135M-17 Standard Specification for Seamless Brass Tube / 2017
• B152/B152M-24: B152/B152M-24 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar / 2024
• B209/B209M-21a: B209/B209M-21a Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate / 2021
• B210/B210M-19a: B210/B210M-19a Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes / 2019
• B241/B241M-22: B241/B241M-22 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube / 2022
• B251/B251M-17: B251/B251M-17 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube / 2017
• B280-23: B280-23 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service / 2023
• B302-17: B302-17 Standard Specification for Threadless Copper Pipe, Standard Sizes / 2017
• B306-20: B306-20 Standard Specification for Copper Drainage Tube (DWV) / 2020
• B361-16: B361-16 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings / 2016
• B370-22: B370-22 Standard Specification for Copper Sheet and Strip for Building Construction / 2022
• B447-12a-Reapproved2021: B447-12a(2021) Standard Specification for Welded Copper Tube / 2021
• B491/B491M-23: B491/B491M-23 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications / 2023
• B687-99-Reapproved2023: B687-99(2023) Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples / 2023
• B695-21: B695-21 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel / 2021
• B813-24: B813-24 Standard Specification for Water Flushable Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube / 2024
• B819-19: B819-19 Standard Specification for Seamless Copper Tube for Medical Gas Systems / 2019
• B828-23: B828-23 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings / 2023
• B1003-16-Reapproved2023: B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets / 2023
• C4-04-Reapproved2023: C4-04(2023) Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile / 2023
• C5-10: C5-10 Standard Specification for Quicklime for Structural Purposes / 2010
• C5-24: C5-24 Standard Specification for Quicklime for Structural Purposes / 2024
• C14-20: C14-20 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe / 2020
• C22/C22M-00-Reapproved2021: C22/C22M-00(2021) Standard Specification for Gypsum / 2021
• C27-98-Reapproved2022: C27-98(2022) Standard Classification of Fireclay and High-Alumina Refractory Brick / 2022
• C28/C28M-10-Reapproved2020: C28/C28M-10(2020) Standard Specification for Gypsum Plasters / 2020
• C31/C31M-24b: C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field / 2024
• C33/C33M-24: C33/C33M-24 Standard Specification for Concrete Aggregates / 2024
• C34-23: C34-23 Standard Specification for Structural Clay Loadbearing Wall Tile / 2023
• C35-01(2019): C35-01(2019) Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster / 2019
• C55-23: C55-23 Standard Specification for Concrete Building Brick / 2023
• C56-22: C56-22 Standard Specification for Structural Clay Nonloadbearing Tile / 2022
• C59/C59M-00-Reapproved2020: C59/C59M-00(2020) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster / 2020
• C61/C61M-00-Reapproved2020: C61/C61M-00(2020) Standard Specification for Gypsum Keene's Cement / 2020
• C62-23: C62-23 Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale) / 2023
• C64-72(1977): C64-72(1977) Standard Specification for Refractories for Incinerators and Boilers / 1977
• C67/C67M-23a: C67/C67M-23a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile / 2023
• C73-23: C73-23 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) / 2023
• C76-22a: C76-22a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe / 2022
• C90-24: C90-24 Standard Specification for Loadbearing Concrete Masonry Units / 2024
• C91/C91M-23: C91/C91M-23 Standard Specification for Masonry Cement / 2023
• C94/C94M-24c: C94/C94M-24c Standard Specification for Ready-Mixed Concrete / 2024
• C109/C109M-23: C109/C109M-23 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens) / 2023
• C126-22: C126-22 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units / 2022
• C129-23: C129-23 Standard Specification for Nonloadbearing Concrete Masonry Units / 2023
• C140/C140M-24: C140/C140M-24 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units / 2024
• C141/C141M-14-Reapproved2022: C141/C141M-14(2022) Standard Specification for Hydrated Hydraulic Lime for Structural Purposes / 2022
• C143/C143M-20: C143/C143M-20 Standard Test Method for Slump of Hydraulic-Cement Concrete / 2020
• C145-85: C145-85 Specification for Solid Load-Bearing Concrete Masonry Units (Withdrawn 1990) / 1985
• C150/C150M-24: C150/C150M-24 Standard Specification for Portland Cement / 2024
• C172/C172M-17: C172/C172M-17 Standard Practice for Sampling Freshly Mixed Concrete / 2017
• C177-19e1: C177-19e1 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus / 2019
• C199-22: C199-22 Standard Test Method for Pier Test for Refractory Mortars / 2022
• C206-14-Reapproved2022: C206-14(2022) Standard Specification for Finishing Hydrated Lime / 2022
• C207-24: C207-24 Standard Specification for Hydrated Lime for Masonry Purposes / 2024
• C208-22: C208-22 Standard Specification for Cellulosic Fiber Insulating Board / 2022
• C212-22: C212-22 Standard Specification for Structural Clay Facing Tile / 2022
• C216-23: C216-23 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) / 2023
• C270-24: C270-24 Standard Specification for Mortar for Unit Masonry / 2024
• C315-07-Reapproved2021: C315-07(2021) Standard Specification for Clay Flue Liners and Chimney Pots / 2021
• C317/C317M-24: C317/C317M-24 Standard Specification for Gypsum Concrete / 2024
• C330/C330M-23: C330/C330M-23 Standard Specification for Lightweight Aggregates for Structural Concrete / 2023
• C331/C331M-23: C331/C331M-23 Standard Specification for Lightweight Aggregates for Concrete Masonry Units / 2023
• C406/C406M-22: C406/C406M-22 Standard Specification for Roofing Slate / 2022
• C411-19: C411-19 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation / 2019
• C425-22: C425-22 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings / 2022
• C428/C428M-05(2019): C428/C428M-05(2019) Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe / 2019
• C443-21: C443-21 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets / 2021
• C474-15-Reapproved2020: C474-15(2020) Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction / 2020
• C476-23: C476-23 Standard Specification for Grout for Masonry / 2023
• C478/C478M-22: C478/C478M-22 Standard Specification for Circular Precast Reinforced Concrete Manhole Sections / 2022
• C496/C496M-17: C496/C496M-17 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens / 2017
• C503/C503M-23: C503/C503M-23 Standard Specification for Marble Dimension Stone / 2023
• C514-04(2020): C514-04(2020) Standard Specification for Nails for the Application of Gypsum Board / 2020
• C516-19: C516-19 Standard Specification for Vermiculite Loose Fill Thermal Insulation / 2019
• C518-21: C518-21 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus / 2021
• C547-22a: C547-22a Standard Specification for Mineral Fiber Pipe Insulation / 2022
• C549-23: C549-23 Standard Specification for Perlite Loose Fill Insulation / 2023
• C552-22: C552-22 Standard Specification for Cellular Glass Thermal Insulation / 2022
• C557-03(2017): C557-03(2017) Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing / 2017
• C564-20a: C564-20a Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings / 2020
• C578-23: C578-23 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation / 2023
• C587-04(2018): C587-04(2018) Standard Specification for Gypsum Veneer Plaster / 2018
• C595/C595M-24: C595/C595M-24 Standard Specification for Blended Hydraulic Cements / 2024
• C615/C615M-23: C615/C615M-23 Standard Specification for Granite Dimension Stone / 2023
• C616/C616M-22: C616/C616M-22 Standard Specification for Quartz-Based Dimension Stone / 2022
• C629/C629M-22: C629/C629M-22 Standard Specification for Slate Dimension Stone / 2022
• C631-09(2020): C631-09(2020) Standard Specification for Bonding Compounds for Interior Gypsum Plastering / 2020
• C635/C635M-22: C635/C635M-22 Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings / 2022
• C636/C636M-19: C636/C636M-19 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels / 2019
• C652-22: C652-22 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) / 2022
• C685/C685M-24: C685/C685M-24 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing / 2024
• C700-18-Reapproved2022: C700-18(2022) Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated / 2022
• C726-24: C726-24 Standard Specification for Mineral Wool Roof Insulation Board / 2024
• C728-17a-Reapproved2022: C728-17a(2022) Standard Specification for Perlite Thermal Insulation Board / 2022
• C744-21: C744-21 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units / 2021
• C754-20: C754-20 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products / 2020
• C755-20: C755-20 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation / 2020
• C835-06(2020): C835-06(2020) Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C / 2020
• C836/C836M-18-Reapproved2022: C836/C836M-18(2022) Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course / 2022
• C840-23: C840-23 Standard Specification for Application and Finishing of Gypsum Board / 2023
• C841-23: C841-23 Standard Specification for Installation of Interior Lathing and Furring / 2023
• C842-05-Reapproved2021: C842-05(2021) Standard Specification for Application of Interior Gypsum Plaster / 2021
• C843-23: C843-23 Standard Specification for Application of Gypsum Veneer Plaster / 2023
• C844-15-Reapproved2021: C844-15(2021) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster / 2021
• C847-18: C847-18 Standard Specification for Metal Lath / 2018
• C887-20: C887-20 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar / 2020
• C913-23: C913-23 Standard Specification for Precast Concrete Water and Wastewater Structures / 2023
• C919-24: C919-24 Standard Practice for Use of Sealants in Acoustical Applications / 2024
• C920-18: C920-18 Standard Specification for Elastomeric Joint Sealants / 2018
• C926-15b: C926-15b Standard Specification for Application of Portland Cement-Based Plaster / 2015
• C926-24: C926-24 Standard Specification for Application of Portland Cement-Based Plaster / 2024
• C932-06-Reapproved2024: C932-06(2024) Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering / 2024
• C933-23: C933-23 Standard Specification for Welded Wire Lath / 2023
• C946-23: C946-23 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls / 2023
• C954-22: C954-22 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness / 2022
• C956-24: C956-24 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete / 2024
• C957/C957M-17-Reapproved2024: C957/C957M-17(2024) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface / 2024
• C1002-22: C1002-22 Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs / 2022
• C1029-20: C1029-20 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation / 2020
• C1032-18: C1032-18 Standard Specification for Woven Wire Plaster Base / 2018
• C1047-19: C1047-19 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base / 2019
• C1053-00(2015): C1053-00(2015) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications / 2015
• C1063-23: C1063-23 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster / 2023
• C1088-23: C1088-23 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale / 2023
• C1107/C1107M-20: C1107/C1107M-20 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) / 2020
• C1114-06(2019): C1114-06(2019) Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus / 2019
• C1116/C1116M-23: C1116/C1116M-23 Standard Specification for Fiber-Reinforced Concrete / 2023
• C1157/C1157M-23: C1157/C1157M-23 Standard Performance Specification for Hydraulic Cement / 2023
• C1167-22: C1167-22 Standard Specification for Clay Roof Tiles / 2022
• C1173-22: C1173-22 Standard Specification for Flexible Transition Couplings for Underground Piping Systems / 2022
• C1177/C1177M-24: C1177/C1177M-24 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing / 2024
• C1178/C1178M-24: C1178/C1178M-24 Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel / 2024
• C1186-22e1: C1186-22e1 Standard Specification for Flat Fiber-Cement Sheets / 2022
• C1261-22: C1261-22 Standard Specification for Firebox Brick for Residential Fireplaces / 2022
• C1277-20: C1277-20 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings / 2020
• C1278/C1278M-24: C1278/C1278M-24 Standard Specification for Fiber-Reinforced Gypsum Panel / 2024
• C1280-18-Reapproved2023: C1280-18(2023) Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing / 2023
• C1283-15-Reapproved2021: C1283-15(2021) Standard Practice for Installing Clay Flue Lining / 2021
• C1288-23: C1288-23 Standard Specification for Fiber-Cement Interior Substrate Sheets / 2023
• C1289-23a: C1289-23a Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board / 2023
• C1313/C1313M-13(2019): C1313/C1313M-13(2019) Standard Specification for Sheet Radiant Barriers for Building Construction Applications / 2019
• C1325-22e1: C1325-22e1 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units / 2022
• C1328/C1328M-23: C1328/C1328M-23 Standard Specification for Plastic (Stucco) Cement / 2023
• C1363-24: C1363-24 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus / 2024
• C1364-23e1: C1364-23e1 Standard Specification for Architectural Cast Stone / 2023
• C1371-15-Reapproved2022: C1371-15(2022) Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers / 2022
• C1372-23: C1372-23 Standard Specification for Dry-Cast Segmental Retaining Wall Units / 2023
• C1396/C1396M-17: C1396/C1396M-17 Standard Specification for Gypsum Board / 2017
• C1405-23: C1405-23 Standard Specification for Glazed Brick (Single Fired, Brick Units) / 2023
• C1440-21: C1440-21 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems / 2021
• C1460-21: C1460-21 Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground / 2021
• C1461-21: C1461-21 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use / 2021
• C1492-22: C1492-22 Standard Specification for Concrete Roof Tile / 2022
• C1513-18: C1513-18 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections / 2018
• C1531-15: C1531-15 Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index / 2015
• C1531-22: C1531-22 Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index / 2022
• C1540-20: C1540-20 Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings / 2020
• C1549-16-Reapproved2022: C1549-16(2022) Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer / 2022
• C1563-08-Reapproved2021: C1563-08(2021) Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications / 2021
• C1568-08-Reapproved2020: C1568-08(2020) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method) / 2020
• C1569-22: C1569-22 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method) / 2022
• C1570-22: C1570-22 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method) / 2022
• C1629/C1629M-23: C1629/C1629M-23 Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels / 2023
• C1634-23: C1634-23 Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units / 2023
• C1634-23a: C1634-23a Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units / 2023
• C1644-06(2017): C1644-06(2017) Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes / 2017
• C1658/C1658M-19e1: C1658/C1658M-19e1 Standard Specification for Glass Mat Gypsum Panels / 2019
• C1668-24: C1668-24 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems / 2024
• C1670/C1670M-24: C1670/C1670M-24 Standard Specification for Adhered Manufactured Stone Masonry Veneer Units / 2024
• C1691-21: C1691-21 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units / 2021
• C1693-11(2017): C1693-11(2017) Standard Specification for Autoclaved Aerated Concrete (AAC) / 2017
• C1707-18: C1707-18 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes / 2018
• C1743-19-Reapproved2024: C1743-19(2024) Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction / 2024
• C1766-15(2019): C1766-15(2019) Standard Specification for Factory-Laminated Gypsum Panel Products / 2019
• C1788-20: C1788-20 Standard Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications / 2020
• C1822-21: C1822-21 Standard Specification for Insulating Covers on Accessible Lavatory Piping / 2021
• C1902-22a: C1902-22a Standard Specification for Cellular Glass Insulation Used in Building and Roof Applications / 2022
• D25-12-Reapproved2022: D25-12(2022) Standard Specification for Round Timber Piles / 2022
• D41/D41M-11-Reapproved2023: D41/D41M-11(2023) Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing / 2023
• D43/D43M-00-Reapproved2024: D43/D43M-00(2024) Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing / 2024
• D56-22: D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester / 2022
• D86-23ae1: D86-23ae1 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure / 2023
• D92-18: D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester / 2018
• D93-20: D93-20 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester / 2020
• D226/D226M-17-Reapproved2023: D226/D226M-17(2023) Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing / 2023
• D227/D227M-03-Reapproved2024: D227/D227M-03(2024) Standard Specification for Coal-Tar Saturated Organic Felt Used in Roofing and Waterproofing / 2024
• D312/D312M-16a-Reapproved2023: D312/D312M-16a(2023) Standard Specification for Asphalt Used in Roofing / 2023
• D323-20a: D323-20a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) / 2020
• D422-63(2007): D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils / 2007
• D422-63(2007)e2: D422-63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils / 2007
• D448-12-Reapproved2022: D448-12(2022) Standard Classification for Sizes of Aggregate for Road and Bridge Construction / 2022
• D449/D449M-03-Reapproved2021: D449/D449M-03(2021) Standard Specification for Asphalt Used in Dampproofing and Waterproofing / 2021
• D450/D450M-07-Reapproved2024: D450/D450M-07(2024) Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing / 2024
• D635-22: D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position / 2022
• D1003-21: D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics / 2021
• D1143/D1143M-20e1: D1143/D1143M-20e1 Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load / 2020
• D1227/D1227M-13-Reapproved2024: D1227/D1227M-13(2024) Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing / 2024
• D1248-16: D1248-16 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable / 2016
• D1253-14-e1-Reapproved2021: D1253-14(2021)e1 Standard Test Method for Residual Chlorine in Water / 2021
• D1527-99(2005): D1527-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 / 2005
• D1557-12-Reapproved2021: D1557-12(2021) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft³ (2,700 kN-m/m³)) / 2021
• D1593-22: D1593-22 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting / 2022
• D1784-20: D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds / 2020
• D1785-21a: D1785-21a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 / 2021
• D1863/D1863M-05-Reapproved2024: D1863/D1863M-05(2024) Standard Specification for Mineral Aggregate Used on Built-Up Roofs / 2024
• D1869-15-Reapproved2022: D1869-15(2022) Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe / 2022
• D1929-23: D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics / 2023
• D1970/D1970M-21: D1970/D1970M-21 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection / 2021
• D2104-03: D2104-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010) / 2003
• D2178/D2178M-15a-Reapproved2021: D2178/D2178M-15a(2021) Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing / 2021
• D2235-22: D2235-22 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings / 2022
• D2239-22: D2239-22 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter / 2022
• D2241-24: D2241-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) / 2024
• D2282-99(2005): D2282-99(2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007) / 2005
• D2412-21: D2412-21 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading / 2021
• D2464-23: D2464-23 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 / 2023
• D2466-24: D2466-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 / 2024
• D2467-24: D2467-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 / 2024
• D2468-96a: D2468-96a Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003) / 1996
• D2487-17e1: D2487-17e1 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) / 2017
• D2513-24: D2513-24 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings / 2024
• D2559-12a-Reapproved2024: D2559-12a(2024) Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions / 2024
• D2564-20-Reapproved2024: D2564-20(2024) Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems / 2024
• D2609-24: D2609-24 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe / 2024
• D2626/D2626M-04-Reapproved2020: D2626/D2626M-04(2020) Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing / 2020
• D2657-07-Reapproved2023: D2657-07(2023) Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings / 2023
• D2661-24: D2661-24 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings / 2024
• D2665-24: D2665-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2024
• D2672-20e1: D2672-20e1 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement / 2020
• D2680-20: D2680-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping / 2020
• D2683-20: D2683-20 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing / 2020
• D2729-21: D2729-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings / 2021
• D2737-22: D2737-22 Standard Specification for Polyethylene (PE) Plastic Tubing / 2022
• D2751-05: D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings / 2005
• D2822/D2822M-05(2011)e1: D2822/D2822M-05(2011)e1 Standard Specification for Asphalt Roof Cement, Asbestos Containing / 2011
• D2823/D2823M-05(2011)e1: D2823/D2823M-05(2011)e1 Standard Specification for Asphalt Roof Coatings, Asbestos Containing / 2011
• D2824/D2824M-18-Reapproved2024: D2824/D2824M-18(2024) Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos / 2024
• D2843-22: D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics / 2022
• D2846/D2846M-24: D2846/D2846M-24 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems / 2024
• D2855-20-Reapproved2024: D2855-20(2024) Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets / 2024
• D2859-16-Reapproved2021: D2859-16(2021) Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials / 2021
• D2898-10-Reapproved2024: D2898-10(2024) Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing / 2024
• D2949-24: D2949-24 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings / 2024
• D2996-23: D2996-23 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe / 2023
• D3019/D3019M-17-Reapproved2024: D3019/D3019M-17(2024) Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered / 2024
• D3034-24: D3034-24 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings / 2024
• D3035-22: D3035-22 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter / 2022
• D3138-21: D3138-21 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components / 2021
• D3139-19: D3139-19 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals / 2019
• D3161/D3161M-20: D3161/D3161M-20 Standard Test Method for Wind Resistance of Steep Slope Roofing Products (Fan-Induced Method) / 2020
• D3200-74-Reapproved2022: D3200-74(2022) Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles / 2022
• D3201/D3201M-20: D3201/D3201M-20 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products / 2020
• D3212-21: D3212-21 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals / 2021
• D3261-24: D3261-24 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing / 2024
• D3278-21: D3278-21 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus / 2021
• D3309-96a(2002): D3309-96a(2002) Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) / 2002
• D3311-22: D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns / 2022
• D3462/D3462M-23: D3462/D3462M-23 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules / 2023
• D3468/D3468M-99-Reapproved2020: D3468/D3468M-99(2020) Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing / 2020
• D3498-19a: D3498-19a Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing / 2019
• D3679-24: D3679-24 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding / 2024
• D3689/D3689M-22: D3689/D3689M-22 Standard Test Methods for Deep Foundation Elements Under Static Axial Tensile Load / 2022
• D3737-18-e1-Reapproved2023: D3737-18(2023)e1 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) / 2023
• D3746/D3746M-85-Reapproved2022: D3746/D3746M-85(2022) Standard Test Method for Impact Resistance of Bituminous Roofing Systems / 2022
• D3747-79(2007): D3747-79(2007) Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation / 2007
• D3787-16-Reapproved2020: D3787-16(2020) Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test / 2020
• D3909/D3909M-22: D3909/D3909M-22 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules / 2022
• D3957-09(2020): D3957-09(2020) Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings / 2020
• D4021-92: D4021-92 Standard Specification for Glass-Fiber-Reinforced Polyester Underground Petroleum Storage Tanks (Withdrawn 1999) / 1992
• D4022/D4022M-07(2012)e1: D4022/D4022M-07(2012)e1 Standard Specification for Coal Tar Roof Cement, Asbestos Containing / 2012
• D4068-17-Reapproved2022: D4068-17(2022) Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane / 2022
• D4272/D4272M-23: D4272/D4272M-23 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop / 2023
• D4318-17e1: D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils / 2017
• D4434/D4434M-21: D4434/D4434M-21 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing / 2021
• D4479/D4479M-07-Reapproved2024: D4479/D4479M-07(2024) Standard Specification for Asphalt Roof Coatings—Asbestos-Free / 2024
• D4551-22: D4551-22 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane / 2022
• D4601/D4601M-04-Reapproved2020: D4601/D4601M-04(2020) Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing / 2020
• D4637/D4637M-15-e1-Reapproved2021: D4637/D4637M-15(2021)e1 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane / 2021
• D4829-21: D4829-21 Standard Test Method for Expansion Index of Soils / 2021
• D4869/D4869M-16a-Reapproved2021: D4869/D4869M-16a(2021) Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing / 2021
• D4897/D4897M-16-Reapproved2023: D4897/D4897M-16(2023) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing / 2023
• D4945-17: D4945-17 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations / 2017
• D4990-97a-Reapproved2020: D4990-97a(2020) Standard Specification for Coal-Tar Glass Felt Used in Roofing and Waterproofing / 2020
• D5019-07a: D5019-07a Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane (Withdrawn 2011) / 2007
• D5034-21: D5034-21 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) / 2021
• D5055-19e1: D5055-19e1 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists / 2019
• D5197-21: D5197-21 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) / 2021
• D5456-21e1: D5456-21e1 Standard Specification for Evaluation of Structural Composite Lumber Products / 2021
• D5516-18: D5516-18 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures / 2018
• D5664-17: D5664-17 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber / 2017
• D5665/D5665M-99a-Reapproved2021: D5665/D5665M-99a(2021) Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing / 2021
• D5878-19: D5878-19 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes / 2019
• D5882-16: D5882-16 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations / 2016
• D6083/D6083M-24: D6083/D6083M-24 Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing / 2024
• D6162/D6162M-21: D6162/D6162M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements / 2021
• D6163/D6163M-21: D6163/D6163M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements / 2021
• D6164/D6164M-21: D6164/D6164M-21 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements / 2021
• D6222/D6222M-16-Reapproved2023: D6222/D6222M-16(2023) Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements / 2023
• D6223/D6223M-21: D6223/D6223M-21 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements / 2021
• D6298/D6298M-16-Reapproved2023: D6298/D6298M-16(2023) Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface / 2023
• D6305-21: D6305-21 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing / 2021
• D6380/D6380M-03-Reapproved2022: D6380/D6380M-03(2022) Standard Specification for Asphalt Roll Roofing (Organic Felt) / 2022
• D6464-03a(2017): D6464-03a(2017) Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing / 2017
• D6509/D6509M-16-Reapproved2023: D6509/D6509M-16(2023) Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements / 2023
• D6662-22: D6662-22 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards / 2022
• D6694/D6694M-15-Reapproved2023: D6694/D6694M-15(2023) Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems / 2023
• D6754/D6754M-23: D6754/D6754M-23 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing / 2023
• D6757/D6757M-18-Reapproved2023: D6757/D6757M-18(2023) Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing / 2023
• D6760-16: D6760-16 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing / 2016
• D6841-21: D6841-21 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber / 2021
• D6878/D6878M-21: D6878/D6878M-21 Standard Specification for Thermoplastic Polyolefin-Based Sheet Roofing / 2021
• D6913/D6913M-17: D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis / 2017
• D6947/D6947M-16-Reapproved2023: D6947/D6947M-16(2023) Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System / 2023
• D7032-21: D7032-21 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails / 2021
• D7147-21: D7147-21 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers / 2021
• D7158/D7158M-24a: D7158/D7158M-24a Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method) / 2024
• D7254-21: D7254-21 Standard Specification for Polypropylene (PP) Siding / 2021
• D7425/D7425M-13(2019): D7425/D7425M-13(2019) Standard Specification for Spray Polyurethane Foam Used for Roofing Applications / 2019
• D7655/D7655M-12-Reapproved2022: D7655/D7655M-12(2022) Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems / 2022
• D7672-24: D7672-24 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies / 2024
• D7793-24: D7793-24 Standard Specification for Insulated Vinyl Siding / 2024
• D7949-14: D7949-14 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations / 2014
• D7957/D7957M-22: D7957/D7957M-22 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement / 2022
• D8052/D8052M-22: D8052/D8052M-22 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies / 2022
• D8223-19: D8223-19 Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber / 2019
• D8257/D8257M-22: D8257/D8257M-22 Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing / 2022
• E84-24: E84-24 Standard Test Method for Surface Burning Characteristics of Building Materials / 2024
• E90-23: E90-23 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements / 2023
• E96/E96M-24: E96/E96M-24 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials / 2024
• E108-20a: E108-20a Standard Test Methods for Fire Tests of Roof Coverings / 2020
• E119-24: E119-24 Standard Test Methods for Fire Tests of Building Construction and Materials / 2024
• E136-24c: E136-24c Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C / 2024
• E283/E283M-19: E283/E283M-19 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen / 2019
• E330/E330M-14-Reapproved2021: E330/E330M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference / 2021
• E331-00-Reapproved2023: E331-00(2023) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference / 2023
• E336-23: E336-23 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings / 2023
• E408-13(2019): E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques / 2019
• E488/E488M-22: E488/E488M-22 Standard Test Methods for Strength of Anchors in Concrete Elements / 2022
• E492-22: E492-22 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine / 2022
• E519/E519M-22: E519/E519M-22 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages / 2022
• E605/E605M-19-Reapproved2023: E605/E605M-19(2023) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members / 2023
• E648-23: E648-23 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source / 2023
• E681-09-Reapproved2023: E681-09(2023) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases) / 2023
• E736/E736M-19-Reapproved2023: E736/E736M-19(2023) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members / 2023
• E779-19: E779-19 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization / 2019
• E814-24: E814-24 Standard Test Method for Fire Tests of Penetration Firestop Systems / 2024
• E903-20: E903-20 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres / 2020
• E970-23: E970-23 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source / 2023
• E972-96-Reapproved2021: E972-96(2021) Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight / 2021
• E1007-21: E1007-21 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures / 2021
• E1186-22: E1186-22 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems / 2022
• E1300-24: E1300-24 Standard Practice for Determining Load Resistance of Glass in Buildings / 2024
• E1331-15-Reapproved2023: E1331-15(2023) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry / 2023
• E1354-23: E1354-23 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter / 2023
• E1477-98a-Reapproved2022: E1477-98a(2022) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers / 2022
• E1509-22: E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type / 2022
• E1529-22: E1529-22 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies / 2022
• E1537-22: E1537-22 Standard Test Method for Fire Testing of Upholstered Furniture / 2022
• E1554/E1554M-13-Reapproved2023: E1554/E1554M-13(2023) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization / 2023
• E1590-23: E1590-23 Standard Test Method for Fire Testing of Mattresses / 2023
• E1592-05(2017): E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference / 2017
• E1602-03(2017): E1602-03(2017) Standard Guide for Construction of Solid Fuel Burning Masonry Heaters / 2017
• E1643-24: E1643-24 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs / 2024
• E1677-23: E1677-23 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls / 2023
• E1745-17-Reapproved2023: E1745-17(2023) Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs / 2023
• E1827-22: E1827-22 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door / 2022
• E1886-19: E1886-19 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials / 2019
• E1903-19: E1903-19 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process / 2019
• E1918-21: E1918-21 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field / 2021
• E1966-15(2019): E1966-15(2019) Standard Test Method for Fire-Resistive Joint Systems / 2019
• E1980-11(2019): E1980-11(2019) Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces / 2019
• E1996-23: E1996-23 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes / 2023
• E2072-24: E2072-24 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings / 2024
• E2174-20a: E2174-20a Standard Practice for On-Site Inspection of Installed Firestop Systems / 2020
• E2178-21a: E2178-21a Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials / 2021
• E2231-21: E2231-21 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics / 2021
• E2235-04(2020): E2235-04(2020) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods / 2020
• E2273-18: E2273-18 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies / 2018
• E2307-23b: E2307-23b Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus / 2023
• E2336-20: E2336-20 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems / 2020
• E2353-21: E2353-21 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades / 2021
• E2357-24: E2357-24 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies / 2024
• E2392/E2392M-23: E2392/E2392M-23 Standard Guide for Design of Earthen Wall Building Systems / 2023
• E2393-20a: E2393-20a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers / 2020
• E2399/E2399M-19: E2399/E2399M-19 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems / 2019
• E2404-22: E2404-22 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics / 2022
• E2556/E2556M-10-Reapproved2022: E2556/E2556M-10(2022) Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment / 2022
• E2568-17a: E2568-17a Standard Specification for PB Exterior Insulation and Finish Systems / 2017
• E2570/E2570M-07(2019): E2570/E2570M-07(2019) Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage / 2019
• E2573-24: E2573-24 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics / 2024
• E2579-23b: E2579-23b Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics / 2023
• E2599-22: E2599-22 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics / 2022
• E2634-18-Reapproved2022: E2634-18(2022) Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems / 2022
• E2635-22: E2635-22 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation / 2022
• E2652-22: E2652-22 Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750 °C / 2022
• E2727-18: E2727-18 Standard Practice for Assessment of Rainwater Quality / 2018
• E2751/E2751M-21: E2751/E2751M-21 Standard Practice for Design and Performance of Supported Laminated Glass Walkways / 2021
• E2768-11(2018): E2768-11(2018) Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test) / 2018
• E2813-18: E2813-18 Standard Practice for Building Enclosure Commissioning / 2018
• E2837-23ae1: E2837-23ae1 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies / 2023
• E2843-17: E2843-17 Standard Specification for Demonstrating That a Building is in Walkable Proximity to Neighborhood Assets / 2017
• E2844-23: E2844-23 Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit / 2023
• E2886/E2886M-20: E2886/E2886M-20 Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement / 2020
• E2921-22: E2921-22 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems / 2022
• E2925-19a: E2925-19a Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function / 2019
• E3082-20: E3082-20 Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees / 2020
• E3158-24: E3158-24 Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building / 2024
• F405-13: F405-13 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings / 2013
• F409-22: F409-22 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings / 2022
• F437-24: F437-24 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 / 2024
• F438-23: F438-23 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 / 2023
• F439-24: F439-24 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 / 2024
• F441/F441M-23: F441/F441M-23 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 / 2023
• F442/F442M-23: F442/F442M-23 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) / 2023
• F477-14-Reapproved2021: F477-14(2021) Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe / 2021
• F493-22: F493-22 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings / 2022
• F628-23: F628-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core / 2023
• F656-21: F656-21 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings / 2021
• F667/F667M-16-Reapproved2021: F667/F667M-16(2021) Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings / 2021
• F714-24: F714-24 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter / 2024
• F844-19-Reapproved2024: F844-19(2024) Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use / 2024
• F876-20b: F876-20b Standard Specification for Crosslinked Polyethylene (PEX) Tubing / 2020
• F876-24: F876-24 Standard Specification for Crosslinked Polyethylene (PEX) Tubing / 2024
• F877-24: F877-24 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems / 2024
• F891-24: F891-24 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core / 2024
• F1055-16a-Reapproved2022: F1055-16a(2022) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing / 2022
• F1085-19-Reapproved2024: F1085-19(2024) Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels / 2024
• F1281-24: F1281-24 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe / 2024
• F1282-23a: F1282-23a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe / 2023
• F1292-22: F1292-22 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment / 2022
• F1346-23: F1346-23 Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs / 2023
• F1361-21: F1361-21 Standard Test Method for Performance of Open Vat Fryers / 2021
• F1412-22: F1412-22 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems / 2022
• F1476-07(2019): F1476-07(2019) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications / 2019
• F1484-18-Reapproved2023: F1484-18(2023) Standard Test Methods for Performance of Steam Cookers / 2023
• F1487-21: F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use / 2021
• F1488-14(2019): F1488-14(2019) Standard Specification for Coextruded Composite Pipe / 2019
• F1495-20: F1495-20 Standard Specification for Combination Oven Electric or Gas Fired / 2020
• F1496-13(2019): F1496-13(2019) Standard Test Method for Performance of Convection Ovens / 2019
• F1499-22: F1499-22 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) / 2022
• F1504-14-e1-Reapproved2021: F1504-14(2021)e1 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation / 2021
• F1504-21e1: F1504-21e1 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation / 2021
• F1548-01-Reapproved2023: F1548-01(2023) Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications / 2023
• F1554-20: F1554-20 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength / 2020
• F1667-21: F1667-21 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples / 2021
• F1667/F1667M-21a: F1667/F1667M-21a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples / 2021
• F1673-10-e1-Reapproved2021: F1673-10(2021)e1 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems / 2021
• F1696-20: F1696-20 Standard Test Method for Energy Performance of Stationary-Rack, Door-Type Commercial Dishwashing Machines / 2020
• F1760-16(2020): F1760-16(2020) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content / 2020
• F1807-23: F1807-23 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing / 2023
• F1866-23: F1866-23 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings / 2023
• F1871-24: F1871-24 Standard Specification for Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation / 2024
• F1901-22: F1901-22 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems / 2022
• F1920-20: F1920-20 Standard Test Method for Performance of Rack Conveyor Commercial Dishwashing Machines / 2020
• F1924-19: F1924-19 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing / 2019
• F1960-24: F1960-24 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing / 2024
• F1970-23: F1970-23 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems / 2023
• F1973-21: F1973-21 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems / 2021
• F1974-23: F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe / 2023
• F1986-01(2011): F1986-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems / 2011
• F2006-21: F2006-21 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows / 2021
• F2080-23: F2080-23 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe / 2023
• F2090-21: F2090-21 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms / 2021
• F2093-18-Reapproved2023: F2093-18(2023) Standard Test Method for Performance of Rack Ovens / 2023
• F2098-18: F2098-18 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings / 2018
• F2144-21: F2144-21 Standard Test Method for Performance of Large Open Vat Fryers / 2021
• F2158-08-Reapproved2024: F2158-08(2024) Standard Specification for Residential Central-Vacuum Tube and Fittings / 2024
• F2159-23a: F2159-23a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing / 2023
• F2200-24: F2200-24 Standard Specification for Automated Vehicular Gate Construction / 2024
• F2262-09: F2262-09 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9 / 2009
• F2286-16-Reapproved2023: F2286-16(2023) Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas / 2023
• F2306/F2306M-21: F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications / 2021
• F2324-13(2019): F2324-13(2019) Standard Test Method for Prerinse Spray Valves / 2019
• F2374-24: F2374-24 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices / 2024
• F2389-24a: F2389-24a Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems / 2024
• F2434-19: F2434-19 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing / 2019
• F2561-20: F2561-20 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner / 2020
• F2599-22: F2599-22 Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner / 2022
• F2618-24: F2618-24 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems / 2024
• F2623-24e1: F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications / 2024
• F2648/F2648M-23: F2648/F2648M-23 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications / 2023
• F2735-23: F2735-23 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing / 2023
• F2763/F2763M-16-e1-Reapproved2021: F2763/F2763M-16(2021)e1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications / 2021
• F2764/F2764M-24: F2764/F2764M-24 Standard Specification for 6 in. to 60 in. [150 mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications / 2024
• F2769-24: F2769-24 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems / 2024
• F2806-23: F2806-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) / 2023
• F2831-19-Reapproved2024: F2831-19(2024) Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems / 2024
• F2855-19-Reapproved2024: F2855-19(2024) Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing / 2024
• F2861-20: F2861-20 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes / 2020
• F2881/F2881M-21e1: F2881/F2881M-21e1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications / 2021
• F2945-18-Reapproved2023: F2945-18(2023) Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings / 2023
• F2947/F2947M-21a: F2947/F2947M-21a Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications / 2021
• F2969-12-Reapproved2020: F2969-12(2020) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe / 2020
• F3202-24: F3202-24 Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping / 2024
• F3226/F3226M-19: F3226/F3226M-19 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems / 2019
• F3240-19-Reapproved2023: F3240-19(2023) Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines / 2023
• F3253-24: F3253-24 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems / 2024
• F3328-18: F3328-18 Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets / 2018
• F3347-23: F3347-23 Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing / 2023
• F3348-23a: F3348-23a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing / 2023
• F3371-22: F3371-22 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications / 2022

Subscription Information

MADCAD.com ASTM Standards subscriptions are annual and access is unlimited concurrency based (number of people that can access the subscription at any given time) from single office location. For pricing on multiple office location ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.

Some features of MADCAD.com ASTM Standards Subscriptions are:

- Online access: With MADCAD.com’ s web based subscription service no downloads or installations are required. Access ASTM Standards from any browser on your computer, tablet or smart phone.

- Immediate Access: As soon as the transaction is completed, your ASTM Standards Subscription will be ready for access.

For any further information on MADCAD.com ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.

About ASTM

ASTM International, formerly known as the American Society for Testing and Materials (ASTM), is a globally recognized leader in the development and delivery of international voluntary consensus standards. Today, some 12,000 ASTM standards are used around the world to improve product quality, enhance safety, facilitate market access and trade, and build consumer confidence. ASTM’s leadership in international standards development is driven by the contributions of its members: more than 30,000 of the world’s top technical experts and business professionals representing 150 countries. Working in an open and transparent process and using ASTM’s advanced electronic infrastructure, ASTM members deliver the test methods, specifications, guides, and practices that support industries and governments worldwide.