Already a subscriber? 
MADCAD.com Free Trial
Sign up for a 3 day free trial to explore the MADCAD.com interface, PLUS access the
2009 International Building Code to see how it all works.
If you like to setup a quick demo, let us know at support@madcad.com
or +1 800.798.9296 and we will be happy to schedule a webinar for you.
Security check
Please login to your personal account to use this feature.
Please login to your authorized staff account to use this feature.
Are you sure you want to empty the cart?
BS EN 10217-3:2019 - TC Tracked Changes. Welded steel tubes for pressure purposes. Technical delivery conditions - Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties, 2019
- Cross-references
- Summary of pages
- (includes amendment A1:2005)
- Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 3: Elektrisch geschweißte und unterpulvergeschweißte Rohre aus legierten Feinkornbaustählen (enthält Änderung A1:2005) mit festgelegten Eigenschaften bei Raum-, erhöhten und tiefen Temperaturen
- Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 3: Tubes en aciers allié à grain fin (inclut l'amendement A1:2005) acier en acier allié à grains fins, soudés électriquement et soudés à l'arc immergé avec caractéristiques spécifiées à basse température et température élevée
- European foreword [Go to Page]
- 1 Scope
- 2 Normative References references [Go to Page]
- 3 Terms and definitions [Go to Page]
- 3.1
- 3.2
- 3.3
- fine grain steel
- 3.4
- qualification of welding procedure
- 3.5
- approval of welding procedure [Go to Page]
- 3.4
- 3.5
- 3.6
- 3.7
- 4 Symbols
- 5 Classification and designation [Go to Page]
- 5.1 Classification
- 5.2 Designation
- 6 Information to be supplied by the purchaser [Go to Page]
- 6.1 Mandatory information
- 6.2 Options
- 6.3 Example of an order
- 7 Manufacturing process [Go to Page]
- 7.1 Steelmaking process
- 7.2 Deoxidation process
- 7.37.2 Tube manufacture and delivery conditions [Go to Page]
- Table 1 — Tube manufacturing processes, route and delivery condition
- 8 Requirements [Go to Page]
- 8.1 General
- 8.2 Chemical composition [Go to Page]
- 8.2.1 Cast analysis
- Table 3 — Permissible deviations of the product analysis from the specified limits on cast analysis given in Table 2
- 8.4 Mechanical properties [Go to Page]
- Table 4 — Mechanical properties at room temperaturea
- 8.4.2 Appearance [Go to Page]
- 8.5.2 Tube surface
- 8.4.3 Internal soundness [Go to Page]
- 8.5.3 Internal soundness
- 8.4.3.18.5.3.1 Leak Tightnesstightness
- 8.4.3.28.5.3.2 Non-Destructive Testing
- 8.58.6 Straightness
- 8.68.7 Preparation of ends [Go to Page]
- Figure 1 — Tube end bevel
- Table 8 — Preferred dimensions of electric weldedHFW steel tubes
- Table 9 — Preferred dimensions of submerged arc weldedSAW steel tubes
- 8.7.28.8.2 Mass
- 8.7.38.8.3 Lengths
- 8.7.48.8.4 Tolerances
- Table 10 — Tolerances on outside diameter and wall thickness
- 8.7.4.28.8.4.2 Height of the weld seam
- Table 11 — Maximum height of the weld seambead for HFW tubes
- Figure 2 — Radial offset of the strip edges (HFW tubes)
- Table 12 — Maximum height of the weld seam for SAW tubes
- 8.7.4.38.8.4.3 Radial offset of plate or strip edges at the weld of SAW tubes
- Figure 3 — Radial offset of abutting plate/strip edges (SAW pipe)
- 8.7.4.48.8.4.4 Misalignment of the weld seam of SAW tubes
- Figure 4 — Example showing the possible misalignment of the weld seams
- Table 14 — Tolerances on exact length
- 8.7.4.68.8.4.6 Out-of-roundness
- 9 Inspection [Go to Page]
- 9.1 Type of inspection
- 9.2 Inspection documents [Go to Page]
- 9.2.1 Types of inspection documents
- 9.2.1 Types of inspection documents [Go to Page]
- 9.2.2 Content of inspection documents
- 9.3 Summary of inspection and testing [Go to Page]
- Table 16— Number of tubes per testTest unit details
- 10.2 Preparation of samples and test pieces [Go to Page]
- 10.2.1 Selection and preparation of samples for product analysis
- 10.2.2 Location, orientation and preparation of samples and test pieces for mechanical tests
- 10.2.2.2 Test pieces for tensile tests ofon the base materialtube body
- 10.2.2.3 Test pieces for tensile tests on the weld
- 10.2.2.4 Test pieces for flattening test, ring tensile test, drift expanding test, ring expanding test
- 10.2.2.5 Test pieces for weld bend tests (SAW tubes)
- 10.2.2.6 Test piece pieces for the impact testtests on base materialthe tube body
- Figure 25 — Impact test piece orientation
- 11 TestVerification of test methods [Go to Page]
- 11.1 Chemical analysis
- 11.2 Tensile test [Go to Page]
- 11.2.1 Tensile test on the base materialtube body
- 11.2.1.2 At elevated temperature
- 11.2.2 Transverse tensile test on the weld
- 11.3 Flattening test
- 11.4 Ring tensile test
- 11.5 Drift expanding test [Go to Page]
- Table 17 — Drift expanding test requirements
- 11.6 Ring expanding test
- 11.7 Weld bend test
- 11.8 Impact test
- 11.9 Leak tightness test [Go to Page]
- 11.9.1 Hydrostatic test
- 11.9.2 Electromagnetic test
- 11.10 Dimensional inspection
- 11.11 Visual examination
- 11.12 Non-Destructive Testing [Go to Page]
- 11.12.1 Non-Destructive Testing of the weld of HFW tubes
- 11.12.2 Non-Destructive Testing destructive testing of SAW tubes [Go to Page]
- 11.12.2.1 Non-Destructive Testing of the weld seam
- 11.12.2.2 Non-Destructive Testing for the detection of laminations for tubes of test category 2
- 11.12.2.3 Supply of strip end welds in SAWH tubes
- 11.13 Material identification
- 11.14 Retests, sorting and reprocessing
- 12 Marking [Go to Page]
- 12.1 Marking to be applied
- 12.2 Additional marking
- 13 Protection
- Annex A [Go to Page]
- (normative) [Go to Page]
- A.1 General
- A.2 Welding procedure specification [Go to Page]
- A.2.1 General
- A.2.1A.2.2 Parent metal [Go to Page]
- A.2.1.1A.2.2.1 Steel name or number
- A.2.1.2A.2.2.2 Tube dimensions
- A.2.2A.2.3 Weld preparation
- A.2.3A.2.4 Filler wires and fluxes
- A.2.4A.2.5 Electrical parameters
- A.2.5A.2.6 Mechanical parameters
- A.2.6A.2.7 Heat input (kJ/mm)
- A.2.7A.2.8 Preheat temperature
- A.2.8A.2.9 Interpass temperature
- A.2.9A.2.10 Postweld heat treatment
- A.2.10A.2.11 Example of welding procedure form
- A.3 Preparation of sample tube and sample assessment [Go to Page]
- A.3.1 Sample tube
- A.3.2 Sample assessment
- Table A.1 — Example of typical welding procedure specification form [Go to Page]
- Table A.2 — Inspection and testing of the weld
- A.5.2 Macro-examination
- A.5.3 Transverse weld tensile test
- A.5.4 ImpactWeld impact test
- A.6 Test methods [Go to Page]
- A.6.1 Visual examination
- A.6.2 RadiographicNDT test
- A.6.3 Weld bend test
- A.6.4 Macro-examination
- A.6.5 Transverse weld tensile test
- A.6.6 Weld impact test
- A.7 Test acceptance levels [Go to Page]
- A.7.1 Visual examination
- A.7.2 RadiographicNDT test
- A.7.3 Weld bend test
- A.7.4 Macro-examination
- A.7.5 Transverse weld tensile test
- A.7.6 Weld impact test
- A.7.7 Example of test result document [Go to Page]
- Table A.3 — Example of typical test results form
- Table A.4 — Grouping system for SAW steel tubes
- Table A.5 — Range of qualification based on wall thickness T
- A.8.3 Filler wire classification
- A.8.4 Welding flux
- A.8.5 Other parameters
- A.9 Qualification record
- Annex B [Go to Page]
- (normative) [Go to Page]
- Table B.1 — Minimum 0,2 %- proof strength a b
- Annex ZA [Go to Page]
- (informative) [Go to Page]
- Table ZA.1 — Correspondence between this European standardStandard and Annex I of the Directive 97/23/EC2014/68/EU
- Bibliography
- Tracked_Changes_Cover_Markup_new.pdf [Go to Page]
- compares BS EN 10217-3:2019 [Go to Page]
- TRACKED CHANGES
- Test example 1
- Version_Comparison.pdf [Go to Page]
- BS EN 10217-3:2019 to BS EN 10217-3:2002
- 30207509.pdf [Go to Page]
- undefined
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols
- 5 Classification and designation [Go to Page]
- 5.1 Classification
- 5.2 Designation
- 6 Information to be supplied by the purchaser [Go to Page]
- 6.1 Mandatory information
- 6.2 Options
- 6.3 Example of an order
- 7 Manufacturing process [Go to Page]
- 7.1 Steelmaking process
- 7.2 Tube manufacture and delivery conditions
- 7.3 Non Destructive Testing Personnel Requirements
- 8 Requirements [Go to Page]
- 8.1 General
- 8.2 Chemical composition [Go to Page]
- 8.2.1 Cast analysis
- 8.2.2 Product analysis
- 8.3 Grain size
- 8.4 Mechanical properties
- 8.5 Appearance and internal soundness [Go to Page]
- 8.5.1 Weld seam
- 8.5.2 Tube surface
- 8.5.3 Internal soundness [Go to Page]
- 8.5.3.1 Leak tightness
- 8.5.3.2 Non-Destructive Testing
- 8.6 Straightness
- 8.7 Preparation of ends
- 8.8 Dimensions, masses and tolerances [Go to Page]
- 8.8.1 Diameters and wall thickness
- 8.8.2 Mass
- 8.8.3 Lengths
- 8.8.4 Tolerances [Go to Page]
- 8.8.4.1 Tolerances on diameter and thickness
- 8.8.4.2 Height of the weld seam
- 8.8.4.3 Radial offset of plate or strip edges at the weld of SAW tubes
- 8.8.4.4 Misalignment of the weld seam of SAW tubes
- 8.8.4.5 Tolerances on exact length
- 8.8.4.6 Out-of-roundness
- 9 Inspection [Go to Page]
- 9.1 Type of inspection
- 9.2 Inspection documents [Go to Page]
- 9.2.1 Types of inspection documents
- 9.2.2 Content of inspection documents
- 9.3 Summary of inspection and testing
- 10 Sampling [Go to Page]
- 10.1 Frequency of tests [Go to Page]
- 10.1.1 Test unit
- 10.1.2 Number of sample tubes per test unit
- 10.2 Preparation of samples and test pieces [Go to Page]
- 10.2.1 Selection and preparation of samples for product analysis
- 10.2.2 Location, orientation and preparation of samples and test pieces for mechanical tests [Go to Page]
- 10.2.2.1 General
- 10.2.2.2 Test pieces for tensile tests on the tube body
- 10.2.2.3 Test pieces for tensile tests on the weld
- 10.2.2.4 Test pieces for flattening test, ring tensile test, drift expanding test, ring expanding test
- 10.2.2.5 Test pieces for weld bend tests (SAW tubes)
- 10.2.2.6 Test pieces for impact tests on the tube body
- 10.2.2.7 Test pieces for impact tests on the weld
- 11 Verification of test methods [Go to Page]
- 11.1 Chemical analysis
- 11.2 Tensile test [Go to Page]
- 11.2.1 Tensile test on the tube body [Go to Page]
- 11.2.1.1 At room temperature
- 11.2.1.2 At elevated temperature
- 11.2.2 Transverse tensile test on the weld
- 11.3 Flattening test
- 11.4 Ring tensile test
- 11.5 Drift expanding test
- 11.6 Ring expanding test
- 11.7 Weld bend test
- 11.8 Impact test
- 11.9 Leak tightness test [Go to Page]
- 11.9.1 Hydrostatic test
- 11.9.2 Electromagnetic test
- 11.10 Dimensional inspection
- 11.11 Visual examination
- 11.12 Non-Destructive Testing [Go to Page]
- 11.12.1 Non-Destructive Testing of HFW tubes
- 11.12.2 Non-destructive testing of SAW tubes [Go to Page]
- 11.12.2.1 Non-Destructive Testing of the weld seam
- 11.12.2.2 Non-Destructive Testing for the detection of laminations for tubes of test category 2
- 11.12.2.3 Supply of strip end welds in SAWH tubes
- 11.13 Material identification
- 11.14 Retests, sorting and reprocessing
- 12 Marking [Go to Page]
- 12.1 Marking to be applied
- 12.2 Additional marking
- 13 Protection
- Annex A (normative)Qualification of welding procedure for SAW tube production [Go to Page]
- A.1 General
- A.2 Welding procedure specification [Go to Page]
- A.2.1 General
- A.2.2 Parent metal [Go to Page]
- A.2.2.1 Steel name or number
- A.2.2.2 Tube dimensions
- A.2.3 Weld preparation
- A.2.4 Filler wires and fluxes
- A.2.5 Electrical parameters
- A.2.6 Mechanical parameters
- A.2.7 Heat input (kJ/mm)
- A.2.8 Preheat temperature
- A.2.9 Interpass temperature
- A.2.10 Postweld heat treatment
- A.2.11 Example of welding procedure form
- A.3 Preparation of sample tube and sample assessment [Go to Page]
- A.3.1 Sample tube
- A.3.2 Sample assessment
- A.4 Inspection and testing of the weld
- A.5 Weld test pieces [Go to Page]
- A.5.1 Weld bend test pieces
- A.5.2 Macro-examination
- A.5.3 Transverse weld tensile test
- A.5.4 Weld impact test
- A.6 Test methods [Go to Page]
- A.6.1 Visual examination
- A.6.2 NDT test
- A.6.3 Weld bend test
- A.6.4 Macro-examination
- A.6.5 Transverse weld tensile test
- A.6.6 Weld impact test
- A.7 Test acceptance levels [Go to Page]
- A.7.1 Visual examination
- A.7.2 NDT test
- A.7.3 Weld bend test
- A.7.4 Macro-examination
- A.7.5 Transverse weld tensile test
- A.7.6 Weld impact test
- A.7.7 Example of test result document
- A.8 Range of use of qualified procedures [Go to Page]
- A.8.1 Materials groups
- A.8.2 Materials thickness
- A.8.3 Filler wire classification
- A.8.4 Welding flux
- A.8.5 Other parameters
- A.9 Qualification record
- Annex B (normative)Elevated temperature properties for steel grades P275NL1 and NL2
- Annex C (informative)Technical changes from the previous edition [Go to Page]
- C.1 Introduction
- C.2 Technical changes
- Annex ZA (informative)Relationship between this European Standard and the Essential Requirements of 2014/68/EU
- Version_Comparison.pdf [Go to Page]
- BS EN 10217-3:2019 to BS EN 10217-3:2002 [Go to Page]
